Burkert Type 8695 User Manual Page 54
- Page / 186
- Table of contents
- BOOKMARKS
Rated. / 5. Based on customer reviews
54
DeviceNet installation
NOTE!
Breakage of the pneumatic connection pieces due to rotational impact.
▶ When unscrewing and screwing in the transparent cap, do not hold the actuator of the process valve but the
connection housing.
Damage or malfunction due to penetration of dirt and humidity.
▶ To observe degree of protection IP65 / IP67, screw the transparent cap in all the way.
→ Close the device (assembly tool: 674078
9)
).
Body casing
Connection housing
Actuator
Transparent cap
Figure 44: Control head
When the teach function is activated the actuator cannot be actuated via the DeviceNet communication.
9) The assembly tool (674078) is available from your Bürkert sales office.
english
Type 8695
- Operating Instructions 1
- Type 8695 1
- Control head Type 8695 3
- Table of ConTenTs 3
- Inhaltsverzeichnis 4
- 1 OPERATING INSTRUCTIONS 7
- 2 AUTHORIZED USE 8
- 3 BASIC SAFETY INSTRUCTIONS 9
- 4 GENERAL INFORMATION 10
- 5 SYSTEM DESCRIPTION 11
- System description 12
- 6 TECHNICAL DATA 13
- 6.5 Type label 14
- 6.6 Pneumatic data 14
- 6.7 Electrical data 15
- 7 INSTALLATION 16
- Installation 17
- WARNING! 26
- 8 PNEUMATIC INSTALLATION 28
- Pneumatic installation 29
- 9.1 Safety instructions 30
- 9.2 Electrical installation 31
- Figure 19: Open control head 32
- Figure 20: Teach function 33
- 9.4.1 Status LED yellow 34
- → Insert puck 34
- 9.4.2 Valve LED yellow 34
- 9.4.4 Jumper function 35
- 10 AS-INTERFACE INSTALLATION 37
- 10.4.1 Safety instructions 38
- → Tighten screws 39
- AS-Interface installation 40
- Figure 29: Open control head 40
- Figure 30: Teach function 41
- Figure 32: Open control head 42
- 10.6.1 Status LED yellow 43
- → Insert puck PCB or puck 43
- 10.6.2 Valve LED yellow 43
- 10.6.3 Bus LED red and green 43
- 10.6.4 End position LEDs 44
- 10.6.5 Jumper function 44
- 11 DEVICENET INSTALLATION 46
- 11.9.1 DIP switches 49
- DeviceNet installation 51
- Figure 42: Teach function 53
- Figure 43: Open control head 53
- Figure 44: Control head 54
- Figure 46: Open control head 56
- 11.13.2 End position LEDs 58
- 11.13.3 Status LED yellow 58
- 11.13.4 Valve LED yellow 58
- 12 SAFETY POSITIONS 59
- 14 ACCESSORIES 59
- 15 DISASSEMBLY 60
- Disassembly 61
- 16 PACKAGING AND TRANSPORT 62
- 17 STORAGE 62
- 18 DISPOSAL 62
- Steuerkopf Typ 8695 63
- 1 DIE BEDIENUNGSANLEITUNG 67
- 2.1 Beschränkungen 68
- 4 ALLGEMEINE HINWEISE 70
- 5 SYSTEMBESCHREIBUNG 71
- 6 TECHNISCHE DATEN 73
- 6.5 Typschild 74
- 6.6 Pneumatische Daten 74
- 6.7 Elektrische Daten 75
- WARNUNG! 86
- 7.5 Drehen des Steuerkopfs 87
- 8 PNEUMATISCHE INSTALLATION 88
- Pneumatische Installation 89
- 9.1 Sicherheitshinweise 90
- 9.4.1 Status LED gelb 94
- 9.4.2 Valve LED gelb 94
- 9.4.4 Jumperfunktion 95
- 10 AS-INTERFACE-INSTALLATION 97
- 10.4.1 Sicherheitshinweise 98
- → Flachkabelklemme öffnen 99
- → Schrauben festziehen 99
- HINWEIS! 100
- 10.6.1 Status-LED gelb 103
- → Puck einsetzen 103
- 10.6.2 Valve-LED gelb 103
- 10.6.3 Bus-LEDs rot und grün 103
- 10.6.5 Jumperfunktion 104
- 10.6.4 Endstellung-LEDs 104
- 11 DEVICENET-INSTALLATION 106
- 11.5 Schnittstellen 107
- 11.9.1 DIP-Schalter 109
- DeviceNet-Installation 111
- Typ 8695 111
- Steuerventilen bei Busfehler 112
- 11.13.2 Endstellung-LEDs 118
- 11.13.3 Status-LED gelb 118
- 11.13.4 Valve-LED gelb 118
- 12 SICHERHEITSSTELLUNGEN 119
- 13 WARTUNG 119
- 14 ZUBEHÖR 119
- 15 DEMONTAGE 120
- → Rundstecker lösen 121
- 16 VERPACKUNG, TRANSPORT 122
- 17 LAGERUNG 122
- 18 ENTSORGUNG 122
- Tête de commande Type 8695 123
- 1 A PROPOS DE CE MANUEL 127
- 2 UTILISATION CONFORME 128
- DANGER ! 129
- 4 INDICATIONS GÉNÉRALES 130
- 5 DESCRIPTION DU SYSTÈME 131
- 20xx (Classic) 132
- 6.1 Conformité 133
- 6.2 Normes 133
- 6.5 Plaque signalétique 134
- DeviceNet 135
- 7 MONTAGE 136
- REMARQUE ! 137
- AVERTISSEMENT ! 146
- 8 INSTALLATION PNEUMATIQUE 148
- Installation pneumatique 149
- 9.1 Consignes de sécurité 150
- 9.2 Installation électrique 151
- 9.4.1 Status LED jaune 154
- 9.4.4 Fonction des cavaliers 155
- 10.1 Connexion interface AS 157
- 10.4.1 Consignes de sécurité 158
- → Serrer les vis 159
- 10.6.1 Status LED jaune 162
- 10.6.2 Valve LED jaune 163
- 11 DEVICE-NET - INSTALLATION 167
- 11.5 Interfaces 168
- 11.9.1 Interrupteur DIP 170
- Device-Net - Installation 172
- 12 POSITIONS DE SÉCURITÉ 180
- 13 MAINTENANCE 180
- 14 ACCESSOIRES 180
- 15 DÉMONTAGE 181
- 16 EMBALLAGE, TRANSPORT 183
- 17 STOCKAGE 183
- 18 ÉLIMINATION 183
Related products and manuals for Accessories for water Burkert Type 8695
(34 pages)
(3 pages)© 2020, manymanuals.com. All rights reserved. | 0.436 s |
Manymanuals.com
Manymanuals.de
Manymanuals.fr
Manymanuals.it
Manymanuals.pl
Manymanuals.cz
Manymanuals.es
Manymanuals-pt.com
Comments to this Manuals