Operating Instructions Type 5282
Design:
2-way solenoid valve, direct acting, normally closed (Circuit func-
tion A).
Seal Materials and Fluids handled:
See Table 1.
Fluid and Ambient Temperature:
For Hazardous Locations Div. 1 (T4 rated)
Max. Ambient Temperature 104 °F (40 °C)
Max. Fluid Temperature 194 °F (90 °C)
The UL-listed valve for Hazardous Locations is suitable for the
fluids air, inert gas, water and gasoline.
For Hazardous Locations Div. 1 (T6 rated)
Max. Ambient Temperature 104 °F (40 °C)
Max. Fluid Temperature 140 °F (60 °C)
For Intrinsically Safe Apparatus for use in Class I, II and III,
Division 1 Hazardous Locations (T6 rated)
Max. Ambient Temperature 140 °F (60 °C)
Max. Fluid Temperature 140 °F (60 °C)
For Hazardous Locations Div. 2 and Ordinary Locations:
See Table 1.
Pressure Range:
Maximum inlet pressure see label on valve.
Installation:
Before installing valve ensure that piping etc. is free of foreign
matter (metal shavings, pipe sealing materials, welding scale etc.).
Installation as required but preferable with coil uppermost. Instal-
lation in this position tends to prevent foreign matter remaining in
core tube (increased life). Do not put any loads on coil unit.
PTFE tape is recommended for sealing ports. The arrow on the
valvebody indicates the direction of flow.
Assembly instructions:
The conduit connector on the coil (4) must be supported against
torque during the assembly using appropriate tools (1) (i.e. pliers,
gripper...) (for example a gripper).
While tightening for example a fitting (3) into the conduit connec-
tor attention must be paid to the fact that a max. torque of 20Nm
(177lbf in) is not exceeded.
Marking (example):
Body Material
BR = Brass
SS = Stainless Steel
Seal Material
EPDM
NBR
FKM
Circuit function
A = Normally Closed
B = Normally Open
Item No.
Voltage / Frequency / Power Consumption
Maximum Pressure
Approvals
The valve is either approved as
General Purpose valve for Hazardous Locations
Class I, Division 1, Group A, B, C, D
Class II, Division 1, Group E, F, G
Class III, Division 1 and 2
Operating Temperature T 4
or
General Purpose valve for Hazardous Locations
Class I, Division 1, Group A, B, C, D
Class II, Division 1, Group E, F, G
Class III, Division 1 and 2
Operating Temperature T 6
or
Intrinsically Safe Apparatus for Hazardous Locations
Class I, Division 1, Group A, B, C, D
Class II, Division 1, Group E, F, G
Class III, Division 1
Operating Temperature T 6
or
FM approved as
Nonincendive for Hazardous Locations
Class I, Division 2, Group A, B, C, D
Class II, Division 2, Group F, G
Class III, Division 1 and 2
Operating Temperature T 4
UL listed for General Purpose
CSA approved for General Purpose
See label on the valve.
Operating Instructions 1105/11_EN-EN_00801551
Seal materials
Fluid Temperatures [°F] NBR EPDM FKM
Air
Fluid
Ambient
+ 32 to + 176
+ 32 to + 131
- 22 to + 194
+ 14 to + 131
+ 32 to + 194
+ 32 to + 131
Water
Fluid
Ambient
+ 41 to + 176
+ 32 to + 131
+ 41 to + 194
+ 14 to + 131
+ 41 to + 194
+ 32 to + 131
Neutral gas
Fluid
Ambient
+ 32 to + 176
+ 32 to + 131
- 22 to + 194
+ 14 to + 131
+ 32 to + 194
+ 32 to + 131
Light oil
Fluid
Ambient
+ 32 to + 140
+ 32 to + 131
+ 32 to + 140
+ 32 to + 131
LP-gas
Fluid
Ambient
+ 32 to + 140
+ 32 to + 131
+ 32 to + 140
+ 32 to + 131
Voltage 12V or 24V
UL / UR valid with
class 2 power supply only
(2 pages)
(6 pages)
Manymanuals.com
Manymanuals.de
Manymanuals.fr
Manymanuals.it
Manymanuals.pl
Manymanuals.cz
Manymanuals.es
Manymanuals-pt.com
Comments to this Manuals